LDT060-1205-C2160W Class 2 Constant Voltage LED Driver
Features
- High E ciency (up to 88%)
- Constant Voltage Output
- Input Surge Protection: 2kV line-line, 4kV line-earth
- All-Around Protection: OVP, OCP, SCP, OTP
- Waterproof(IP67) and UL Dry / Damp / Wet Location
- Active Power Factor Correction
- Class2 and SELV
Download
Description
The LDT60 series is a 60W, Class 2 constant-Voltage outdoor LED Driverthat operates from 90-305 VAC input with excellent power factor. It iscreated for LED strip, LED module, LED landscape light. The high e ciencyof these drivers and compact metal case enables them to run cooler,significantly improving reliability and extending product life. To ensuretrouble-free operation, protection is provided against input surge, outputover voltage, over current, short circuit, and over temperature.
Technical Information
60W Driver
| MODEL NO | OUTPUT VOLTAGE | INPUT VOLTAGE RANGE | OUTPUT CURRENT RANGE | MAX OUTPUT POWER | TYPICAL EFFICIENCY* | POWER FACTOR 110VAC | 220VAC |
|---|---|---|---|---|---|---|
| LDT060-1205-C21 | 12V DC | 90 ~ 305 VAC | 0 ~ 5A | 60W | 84% | 0.99 | 0.96 |
| Parameter | Min. | Typ. | Max. | Note |
|---|---|---|---|---|
| Input Voltage | 90 VAC | - | 305VAC | |
| Input Frequency | 47 Hz | - | 63Hz | |
| Leakage Current | - | - | <0.75mA | AT 277 VAC / 60Hz input, grounding effecttievly. |
| Input AC Current | - | - | 1.0A |
Under 25°C±10°C ambient temperature, rated input and output range.
|
| Inrush Current | - | - | <75A |
At 220 VAC input, 25°C cold start, duration = 1.2 ms, 10%lpk-10%lpk.
|
| PF | 0.96 | - | - |
At 100-277 VAC, 100% load.
|
| THD | - | - | 20% |
| Parameter | Min. | Typ. | Max. | Note |
|---|---|---|---|---|
| Output Voltage Tolerance (full load) | -2.5% | - | 2.5% | At full load condition |
| Output Voltage Tolerance (others) | -5% | - | 5% | Others. At full load condition. |
| Ripple and Noise (pk-pk) | - | - | 2% Vo | Measured by 20Mhz bandwidth oscilloscope and the output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor. |
| Output Overshoot / Undershootshoot / Undershoot |
- | - | 10% | When power on or off. |
| Line Regulation | - | - | ± 1% | |
| Load Regulation | - | - | ± 2% | |
| Turn-on Delay Time (110VAC) | - | 0.9s | 1.5s | Measured at 110VAC input. |
| Turn-on Delay Time (220VAC) | - | 0.5s | 1.0s | Measured at 220VAC input. |
| Load Dynamic Response (Output Deviation) | - | - | 50% V | R/S 1 A/uS Load: 25% - 75% full load. |
| Load Dynamic Response (Settling Time) | - | - | 10ms | |
| Temperature Coefficient | - | - | 0.02% / °C | Case temperature = 0°C - Tc max |